Heat Solutions’ Drum Lid range delivers 200/220L drum compatible lids for all heating and market demands. suitable for both steel and plastic 200/220l drums. lightweight & durable. overlapped skirt makes the lid easy to fit whilst reducing heat losses. reduces process heating cycles. option for branding on top of lid.
Lund & Sorensen manufactures specially designed heating elements for hydraulic oil tanks placed in the nacelle or hub of wind turbines. The viscosity of the oil in these tanks is very dependent on temperature. Heating the tanks therefore makes it possible to optimise oil viscosity.
The Heaters can have various dimensions and are available also with different finishing such as 90º exits / different types of connections socket. New ideas are given birth by the strongly dedicated team of technicians; The product then takes shape thanks to a process where advanced and traditional ways co-exist harmoniously. Heating of Hydraulic Oil, Lubricating Oil and Compressor Oil – but…
To ensure the right ambient conditions inside enclosures, we have a wide range of control equipment for both temperature and humidity. Electronic precision thermostat with adjustable differential. Thermostat with double contacts for different fan and heater voltage. Double thermostat for control of cooling and heating. Extra small din-tail thermostat for cooling of heating. Electronic combined thermostat and hygrostat. Tamper proof…
To ensure the right ambient conditions inside enclosures, we have a wide range of control equipment for both temperature and humidity. Electronic precision thermostat with adjustable differential. Thermostat with double contacts for different fan and heater voltage. Double thermostat for control of cooling and heating. Extra small din-tail thermostat for cooling of heating. Electronic combined thermostat and hygrostat. Tamper proof…
PHBC-6 To ensure correct overhaul and maintenance of wind turbines and their blades and to reduce maintenance downtime, Lund & Sørensen has developed and designed a solution that permits the blades to remain warm during the repair period. Perfect curing Full curing support The right TG value instantly Best repair quality Automatic curing control
PHBC means Portable Heat Blanket Controller and ”2” stands for the maximum number of heating blankets with which this unit can operate. The design of the PHBC-2 is basically the same as that of the larger model, the PHBC-6 described in the previous section. Both products are controllers which may help to successfully complete repairs after the first operating cycle. By…
The unit named PHBC-6 (Portable Heating Blanket Controller), controls the temperature via bult-in sensors in the heating jacket. At the same time, the PHBC-6 also measures and logs the ambient temperature and humidity. PHBC-6 is developed in close cooperation with some of the most skilled composite engineers in the turbine blade maintenance business and the manufacturer of heating blankets.
Heating blankets for PHBC systems. All blankets are marked with resistance value, batch no., sensor marking, indication of heat wire placement. They have built-in safety limiters of 120ºC (248ºF), PT100 sensors and up to 10 mtr. power- and sensor cable. The heating blanket will be supplied with a short sleeved cable with plug and a multi cored extension cable to the…
Wire-wound silicone rubber heating elements Surface heaters are ideal for many industrial purposes where precise heating is required. Lund & Sorensen makes heating elements from silicone rubber, which is particularly well suited for this purpose because of its high temperature tolerance and superior electrical insulating properties.
Silicone Rubber Insulated Heaters ADVANTAGES Silicone heaters are suitable for applications where precise and intimate heating is required. Being thin and lightweight, silicone heater mats have a low thermal mass and hence have rapid heat up characteristics with fast response to temperature control. Silicone's wide temperature range tolerance of -60 to +230 °C and superb electrical properties give it a…
Duct heaters are used for air conditioning systems, heat recovery systems and ventilation systems as well as in process plants with a need for heating specific gases. Standard designs maximum air/gas temperature +70ºC. Standard electrical heater intended for mounting in ducts connection with air conditioning system, heat recovery systems and ventilation systems. The duct part is made of hot-galvanized steel…
We are able to offer the widest range on the market, in which custom-designed displays allow you to connect multiple devices and display the temperature digitally and graphically while allowing for data collection. Smartphone technology is also used in IR temperature measurement which allows for viewing of the temperature on a smartphone via NFC wireless technology. IR temperature sensors for…
Lund & Sørensens strip heaters can be plain - for the contact heating of hot planes - or finned to increase the heating surface, which makes them ideal for heatshrink or to work in air as in cabinets or shafts. The various finishing options available (such as leads, slots or terminals) enable us to always identify the best solution to…
Pt100 temperature sensors for monitoring temperatures in control cabinets, nacelles and for external temperature monitoring. Hydraulic and lubrication oil monitoring. Used for e.g. gears and brakes. Humidity sensors for monitoring humidity levels in nacelles and control cabinets. Spring loaded Pt100 sensors for bearing temperature measurement.
Dehumidification- and cabinet heat elements are used for heating and drying of confined spaces, where the risk of low temperature is present, or for equalizing temperature fluctuations to avoid formation of condensation in electric systems.
Cirrus is a range of fan heater units utilizing PTC heating technology. The broad range of types, combined with corresponding accessories, offers the appropriate priduct for many applications. The use of high-grade components ensures highest operational reliability within the corresponding application. Self regulation through PTC characteristics Proven safety based on pre-adjusted limitation of temperature High reliability Compact design through high…
Mounting without screws in square openings as indicated in the cut-out diagram. Plate thickness between 1.5 and 2.2 mm Possible fixing with V-shaped head screws (nor supplied) Fan Filters FPF-series The “FPF” fan-filter units are the outcome of our accumulated experience gained in the field of control cabinet ventilation. Thanks to their particular design, they meet the needs of…