Features: High power to size ratio (50 – 230W) Multipile voltage options available Lightweight Pre-wired Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Finger guard on either end Smartcon® cable enables connecting the DC fan to 12/24V AC Air filter* When specifying 12V fan, select either AC or DC operation. For 24V fan operation, AC…
Features: High power to size ratio 115V or 230V available Lightweight Three power options in a single unit (200W, 300W, or 400W) Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Side mounting bracket for wall mounting (4xM4) Bulkhead mounting bracket for floor mounting (4xM4) Matching Accessories: Inline Thermostat, Thermostats (FGT100, FGT200), Dualstat (FGDT Series)
Features: High power to size ratio (300 – 800W) 115V or 230V available Lightweight Screw terminals for easy wiring Dual power feature Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Air Filter* *Typical power reduction of 10% when 30 PPI filter fixed.
Cirrus fan heaters use positive temperature coefficient (PTC) ceramic heating technology, ideally suited for climate control. The heaters can be controlled independently from the fan, allowing a ‘fan-only’ mode for air circulation. Combined with corresponding accessories, the broad range of self-regulating PTC fan heaters are suitable products for many applications. Cirrus fan heaters are proven to be safe through given…
The most robust of all of our drum heating products, the HBD base drum heater is the ideal heating solution for the toughest industrial environments. suitable for 200l drums and aggressive heating applications robust steel construction heat over platen area ip40 protection 0-150°c thermostat 2 metre armoured power cable
Utilising high quality, handmade, wire wound heating technology, the HIBC/A silicone mat heater is an effective solution for heating any product contained in a bag-in-box intermediate bulk container (IBC). silicone rubber class ii double insulated construction 0-150˚c electronic controller in-built residual current device bespoke sizes made to order integral positive temperature coefficient (ptc) sensor drop in/removable base heater
HIBC/B - Container Heaters All HIBC container heaters are manufactured to conform to the EEC low voltage and EMC directives and CE marked accordingly. It is advised that power to the heater jacket be disconnected when the container is either empty or being filled, or upon installation or removal of the heater itself. It is recommended that the unit be…
The HIJD Insulated Jacket can be used to maintain hot and cold. The HIJD provides a cost effective method of reducing thermal transfer. easy installation flap for filler access bespoke sizes made to order water resistant can be used at the same time as HBD and after the HSSD and HISD standard sizes to fit 25l, 50l, 105l, 205l &…
High levels of performance, powerful heating capabilities and unrivalled durability – the hshp is the latest and leading heater jacket in the heat solutions range. PTFE material delivers eu and us regulatory standards for use with food stuffs high levels of chemical and acid resistance easy clean hygienic heater solution lightest heater jacket on the market standard power availability 1800w…
A flexible and aggressive heating solution for metal drums, the HSSD silicone drum heater provides uniform thermal transfer across the heating face. suitable for metal drums and aggressive heating applications silicone rubber double insulated construction ip40 protection bespoke sizes made to order simple spring fixing moisture and chemical resistant 0-90°c, 0-120°c or 0-180°c thermostat standard sizes to fit 25l, 50l,…
Designed to be powerful, robust and thermally efficient, the HTSD Drum Heater provides a higher power alternative to the HISD Drum Heater for metal drums and containers. suitable for metal drums and aggressive heating applications class ii double insulated product ip40 protection bespoke sizes made to order adjustable, quick release buckles for easy fit high operating temperature of up to…
The Nimbus Series comprises convection heaters and contact heating elements. A wide range of types with different designs and performances for various applications is available. The Nimbus product line is distinguished by patented design characteristics: limited temperature of external profile through thermal decoupling optimised convectional heat transfer through chimney effect self-regulation through PTC technology approved safety on the basis of…
Temperature sensors are used in a lot of different places in the wind turbine, among other things for measurements in: bearings hydraulic systems gear oil control cabinet temperatures Operating temperature Accuracy Proof grade Electrical connection
Typhoon 40 cabinet heater High power to size ratio (100 - 350W) 115V or 230V available Mounting: 35mm DIN rail clip (EN60715) Panel mount 40 x 54mm aperture (1.6 x 2) Build in finger guard (flush fitting) RoHS compliant (EU Directive 2002/95/EC)
IK4C - CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER Absolute measurement of position and speed Interface CANopen DS-301 V4.01 Device Profile DS-406 V2.0 Strokes from 50 to 4000 mm Wide range of connectors for the electrical connection Position resolution up to 2mm Speed resolution up to 0,01mm/sec Rod, nipple, exagonal flange AISI 316 Work temperature: -30°... +75° C Resistance to vibrations (DIN…
Nacelle Heaters from Lund & Sorensen A/S are special designed for cold climate applications inside the nacelle. The Heater is rigid and reliable designed when harsh performance are required. The Heater can be supplied with either 400V or 690V. Same size for all models Only one power supply cable No cable for control voltage Build-in overheating protection for service
Ranges: from -1 to 1000 bar Nominal output signal: 0... 10Vdc (3 wires) / 4... 20mA (2 wires) 0.5...4.5 v ratiometric Compact size Wetted parts: Stainless steel SIL 2 certified according to IEC/EN 62061:2005
Lund & Sorensen A/S has developed a special heating solution that deals with problems often encountered when wind turbines fitted with hydraulic blade pitch systems are installed in very cold areas. Designed to customer requirements Fast to install No maintenance
Lund & Sorensen A/S heating blankets for tip, are specially designed for curing the leading and trailing tip of wind turbine blades. These heating blankets operate at a stable temperature of approximately 60°C, when mounted currectly on the blade tip. Once the tip have been cured, ground and polished, it is possible to carry out any required procedures with no…
Lund & Sorensen A/S heating blankets for leading and trailing edge, are specially designed for curing the leading and trailing edge of wind turbine blades. These heating blankets operate at a stable temperature of approximately 60°C, when mounted currectly on the blade leading and trailing edge. Once the leading and trailing edge have been cured, ground and polished, it is…
The L&S heating blanket control system PHBC-30 Plant System is based on a concept of a central, intelligent, controlling PLC-system combined with simple heating blankets with built-in temperature sensors in as well as external sensors. The advantage of using this system is that a proper curing is ensured each time and that a TG value above 70 is reached in…
Heating blanket with digital precision thermostat. This new generation of heating blankets is developed based on inputs from blade manufactures and blade repair companies and inputs from education and research institutes. Our aim was to develop a blanket suited as a tool for high quality repairs. To ensure a perfect curing, we have added our new digital thermostat, with display. It…
Fan heaters for frost protection in wind turbines. Nacelle Heaters from Lund & Sorensen A/S are special designed for cold climate applications inside the nacelle and tower. The Heater is rigid and reliable designed when harsh performance are required. The Heater can be supplied with either 400V or 690V. The control of the Heater must be done externally.
Heat Solutions’ Drum Lid range delivers 200/220L drum compatible lids for all heating and market demands. suitable for both steel and plastic 200/220l drums. lightweight & durable. overlapped skirt makes the lid easy to fit whilst reducing heat losses. reduces process heating cycles. option for branding on top of lid.
Lund & Sorensen manufactures specially designed heating elements for hydraulic oil tanks placed in the nacelle or hub of wind turbines. The viscosity of the oil in these tanks is very dependent on temperature. Heating the tanks therefore makes it possible to optimise oil viscosity.
The Heaters can have various dimensions and are available also with different finishing such as 90º exits / different types of connections socket. New ideas are given birth by the strongly dedicated team of technicians; The product then takes shape thanks to a process where advanced and traditional ways co-exist harmoniously. Heating of Hydraulic Oil, Lubricating Oil and Compressor Oil – but…
To ensure the right ambient conditions inside enclosures, we have a wide range of control equipment for both temperature and humidity. Electronic precision thermostat with adjustable differential. Thermostat with double contacts for different fan and heater voltage. Double thermostat for control of cooling and heating. Extra small din-tail thermostat for cooling of heating. Electronic combined thermostat and hygrostat. Tamper proof…
To ensure the right ambient conditions inside enclosures, we have a wide range of control equipment for both temperature and humidity. Electronic precision thermostat with adjustable differential. Thermostat with double contacts for different fan and heater voltage. Double thermostat for control of cooling and heating. Extra small din-tail thermostat for cooling of heating. Electronic combined thermostat and hygrostat. Tamper proof…
PHBC-6 To ensure correct overhaul and maintenance of wind turbines and their blades and to reduce maintenance downtime, Lund & Sørensen has developed and designed a solution that permits the blades to remain warm during the repair period. Perfect curing Full curing support The right TG value instantly Best repair quality Automatic curing control
PHBC means Portable Heat Blanket Controller and ”2” stands for the maximum number of heating blankets with which this unit can operate. The design of the PHBC-2 is basically the same as that of the larger model, the PHBC-6 described in the previous section. Both products are controllers which may help to successfully complete repairs after the first operating cycle. By…
The unit named PHBC-6 (Portable Heating Blanket Controller), controls the temperature via bult-in sensors in the heating jacket. At the same time, the PHBC-6 also measures and logs the ambient temperature and humidity. PHBC-6 is developed in close cooperation with some of the most skilled composite engineers in the turbine blade maintenance business and the manufacturer of heating blankets.
Heating blankets for PHBC systems. All blankets are marked with resistance value, batch no., sensor marking, indication of heat wire placement. They have built-in safety limiters of 120ºC (248ºF), PT100 sensors and up to 10 mtr. power- and sensor cable. The heating blanket will be supplied with a short sleeved cable with plug and a multi cored extension cable to the…
Wire-wound silicone rubber heating elements Surface heaters are ideal for many industrial purposes where precise heating is required. Lund & Sorensen makes heating elements from silicone rubber, which is particularly well suited for this purpose because of its high temperature tolerance and superior electrical insulating properties.
Silicone Rubber Insulated Heaters ADVANTAGES Silicone heaters are suitable for applications where precise and intimate heating is required. Being thin and lightweight, silicone heater mats have a low thermal mass and hence have rapid heat up characteristics with fast response to temperature control. Silicone's wide temperature range tolerance of -60 to +230 °C and superb electrical properties give it a…
Duct heaters are used for air conditioning systems, heat recovery systems and ventilation systems as well as in process plants with a need for heating specific gases. Standard designs maximum air/gas temperature +70ºC. Standard electrical heater intended for mounting in ducts connection with air conditioning system, heat recovery systems and ventilation systems. The duct part is made of hot-galvanized steel…
We are able to offer the widest range on the market, in which custom-designed displays allow you to connect multiple devices and display the temperature digitally and graphically while allowing for data collection. Smartphone technology is also used in IR temperature measurement which allows for viewing of the temperature on a smartphone via NFC wireless technology. IR temperature sensors for…
Lund & Sørensens strip heaters can be plain - for the contact heating of hot planes - or finned to increase the heating surface, which makes them ideal for heatshrink or to work in air as in cabinets or shafts. The various finishing options available (such as leads, slots or terminals) enable us to always identify the best solution to…
Pt100 temperature sensors for monitoring temperatures in control cabinets, nacelles and for external temperature monitoring. Hydraulic and lubrication oil monitoring. Used for e.g. gears and brakes. Humidity sensors for monitoring humidity levels in nacelles and control cabinets. Spring loaded Pt100 sensors for bearing temperature measurement.
Dehumidification- and cabinet heat elements are used for heating and drying of confined spaces, where the risk of low temperature is present, or for equalizing temperature fluctuations to avoid formation of condensation in electric systems.
Cirrus is a range of fan heater units utilizing PTC heating technology. The broad range of types, combined with corresponding accessories, offers the appropriate priduct for many applications. The use of high-grade components ensures highest operational reliability within the corresponding application. Self regulation through PTC characteristics Proven safety based on pre-adjusted limitation of temperature High reliability Compact design through high…
Mounting without screws in square openings as indicated in the cut-out diagram. Plate thickness between 1.5 and 2.2 mm Possible fixing with V-shaped head screws (nor supplied) Fan Filters FPF-series The “FPF” fan-filter units are the outcome of our accumulated experience gained in the field of control cabinet ventilation. Thanks to their particular design, they meet the needs of…