The Nimbus Series comprises convection heaters and contact heating elements. A wide range of types with different designs and performances for various applications is available. The Nimbus product line is distinguished by patented design characteristics: limited temperature of external profile through thermal decoupling optimised convectional heat transfer through chimney effect self-regulation through PTC technology approved safety on the basis of…
Temperature sensors are used in a lot of different places in the wind turbine, among other things for measurements in: bearings hydraulic systems gear oil control cabinet temperatures Operating temperature Accuracy Proof grade Electrical connection
Typhoon 40 cabinet heater High power to size ratio (100 - 350W) 115V or 230V available Mounting: 35mm DIN rail clip (EN60715) Panel mount 40 x 54mm aperture (1.6 x 2) Build in finger guard (flush fitting) RoHS compliant (EU Directive 2002/95/EC)
IK4C - CONTACTLESS MAGNETOSTRICTIVE LINEAR POSITION TRANSDUCER Absolute measurement of position and speed Interface CANopen DS-301 V4.01 Device Profile DS-406 V2.0 Strokes from 50 to 4000 mm Wide range of connectors for the electrical connection Position resolution up to 2mm Speed resolution up to 0,01mm/sec Rod, nipple, exagonal flange AISI 316 Work temperature: -30°... +75° C Resistance to vibrations (DIN…
Nacelle Heaters from Lund & Sorensen A/S are special designed for cold climate applications inside the nacelle. The Heater is rigid and reliable designed when harsh performance are required. The Heater can be supplied with either 400V or 690V. Same size for all models Only one power supply cable No cable for control voltage Build-in overheating protection for service
Ranges: from -1 to 1000 bar Nominal output signal: 0... 10Vdc (3 wires) / 4... 20mA (2 wires) 0.5...4.5 v ratiometric Compact size Wetted parts: Stainless steel SIL 2 certified according to IEC/EN 62061:2005
Lund & Sorensen A/S has developed a special heating solution that deals with problems often encountered when wind turbines fitted with hydraulic blade pitch systems are installed in very cold areas. Designed to customer requirements Fast to install No maintenance
Lund & Sorensen A/S heating blankets for tip, are specially designed for curing the leading and trailing tip of wind turbine blades. These heating blankets operate at a stable temperature of approximately 60°C, when mounted currectly on the blade tip. Once the tip have been cured, ground and polished, it is possible to carry out any required procedures with no…
Lund & Sorensen A/S heating blankets for leading and trailing edge, are specially designed for curing the leading and trailing edge of wind turbine blades. These heating blankets operate at a stable temperature of approximately 60°C, when mounted currectly on the blade leading and trailing edge. Once the leading and trailing edge have been cured, ground and polished, it is…
The L&S heating blanket control system PHBC-30 Plant System is based on a concept of a central, intelligent, controlling PLC-system combined with simple heating blankets with built-in temperature sensors in as well as external sensors. The advantage of using this system is that a proper curing is ensured each time and that a TG value above 70 is reached in…
Heating blanket with digital precision thermostat. This new generation of heating blankets is developed based on inputs from blade manufactures and blade repair companies and inputs from education and research institutes. Our aim was to develop a blanket suited as a tool for high quality repairs. To ensure a perfect curing, we have added our new digital thermostat, with display. It…
Fan heaters for frost protection in wind turbines. Nacelle Heaters from Lund & Sorensen A/S are special designed for cold climate applications inside the nacelle and tower. The Heater is rigid and reliable designed when harsh performance are required. The Heater can be supplied with either 400V or 690V. The control of the Heater must be done externally.