Features: High power to size ratio (50 – 230W) Multipile voltage options available Lightweight Pre-wired Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Finger guard on either end Smartcon® cable enables connecting the DC fan to 12/24V AC Air filter* When specifying 12V fan, select either AC or DC operation. For 24V fan operation, AC…
Features: High power to size ratio 115V or 230V available Lightweight Three power options in a single unit (200W, 300W, or 400W) Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Side mounting bracket for wall mounting (4xM4) Bulkhead mounting bracket for floor mounting (4xM4) Matching Accessories: Inline Thermostat, Thermostats (FGT100, FGT200), Dualstat (FGDT Series)
Features: High power to size ratio (300 – 800W) 115V or 230V available Lightweight Screw terminals for easy wiring Dual power feature Separate fan operation capability Options: Mounting: 35mm DIN rail clip (EN60715) Air Filter* *Typical power reduction of 10% when 30 PPI filter fixed.
Cirrus fan heaters use positive temperature coefficient (PTC) ceramic heating technology, ideally suited for climate control. The heaters can be controlled independently from the fan, allowing a ‘fan-only’ mode for air circulation. Combined with corresponding accessories, the broad range of self-regulating PTC fan heaters are suitable products for many applications. Cirrus fan heaters are proven to be safe through given…
The Nimbus Series comprises convection heaters and contact heating elements. A wide range of types with different designs and performances for various applications is available. The Nimbus product line is distinguished by patented design characteristics: limited temperature of external profile through thermal decoupling optimised convectional heat transfer through chimney effect self-regulation through PTC technology approved safety on the basis of…
Typhoon 40 cabinet heater High power to size ratio (100 - 350W) 115V or 230V available Mounting: 35mm DIN rail clip (EN60715) Panel mount 40 x 54mm aperture (1.6 x 2) Build in finger guard (flush fitting) RoHS compliant (EU Directive 2002/95/EC)
To ensure the right ambient conditions inside enclosures, we have a wide range of control equipment for both temperature and humidity. Electronic precision thermostat with adjustable differential. Thermostat with double contacts for different fan and heater voltage. Double thermostat for control of cooling and heating. Extra small din-tail thermostat for cooling of heating. Electronic combined thermostat and hygrostat. Tamper proof…
To ensure the right ambient conditions inside enclosures, we have a wide range of control equipment for both temperature and humidity. Electronic precision thermostat with adjustable differential. Thermostat with double contacts for different fan and heater voltage. Double thermostat for control of cooling and heating. Extra small din-tail thermostat for cooling of heating. Electronic combined thermostat and hygrostat. Tamper proof…
Lund & Sørensens strip heaters can be plain - for the contact heating of hot planes - or finned to increase the heating surface, which makes them ideal for heatshrink or to work in air as in cabinets or shafts. The various finishing options available (such as leads, slots or terminals) enable us to always identify the best solution to…
Dehumidification- and cabinet heat elements are used for heating and drying of confined spaces, where the risk of low temperature is present, or for equalizing temperature fluctuations to avoid formation of condensation in electric systems.
Mounting without screws in square openings as indicated in the cut-out diagram. Plate thickness between 1.5 and 2.2 mm Possible fixing with V-shaped head screws (nor supplied) Fan Filters FPF-series The “FPF” fan-filter units are the outcome of our accumulated experience gained in the field of control cabinet ventilation. Thanks to their particular design, they meet the needs of…
