Windpower
工厂用PHBC-30
REQUEST
The L&S heating blanket control system PHBC-30 Plant System is based on a concept of a central, intelligent, controlling PLC-system combined with simple heating blankets with built-in temperature sensors in as well as external sensors.
The advantage of using this system is that a proper curing is ensured each time and that a TG value above 70 is reached in each curing process without the use of manpower to control the temperature of the heated area during the curing.
In the end, this system will save time and manpower and ensure a consistently high quality of all curing jobs, every time. The first time!
朗森加热毯控制系统 PHBC-30 Plant System 基于中央、智能、控制 PLC 系统的概念，结合了复杂的加热毯、内置温度传感器和外部传感器。
使用该系统的优点是可以保证每次实现适当固化，并且在固化过程中无需人工控制加热区域的温度，每次固化过程中的TG值都可达到70以上。
最后，该系统可节省时间和人力，并确保所有固化工作的质量始终如一。历史首次！
您有问题或需要建议和指导吗？请联系技术支持。
每次固化作业后，都可以生成包含所有信息的完整报告，例如固化周期、温度、固化时间、任何警报，并打印为已根据该特定作业的标准和期望完成的维修文件。
所有控制和记录将通过触摸屏 HMI 面板完成，配有用于温度控制、数据记录、警报记录、趋势曲线和程序运行时间的逻辑构建屏幕。
显示布局将按照指导的逐步过程进行，其中每个步骤都需要确认才能进入下一步。这种分步设置是为了确保操作员了解每个步骤需要做什么，以及在进入下一步之前需要记录哪些内容。
可选配GSM模块，当发生报警或断电时，操作员会收到短信。
该系统有 30 个独立的输出，这意味着多达 30 个加热毯中的每一个都可以使用自己的固化周期/配方独立工作。
配方是预先安装的。 可使用给定密码获取，也可以准确安装特定作业所需的固化周期。
如果发生警报，可能是传感器损坏或温度过高或过低，或者加热毯出现故障、断电或其他相关情况。此时，控制系统顶部的视觉信号灯将开始闪烁。
或者，喇叭会响起。现成选择配方可让操作员轻松执行固化工作。每次启动前，系统都会进行一次快速测试，以确保所有组件已正确连接，并找出任何有缺陷的组件。
The system has 30 independent outputs which means that each of the up to 30 blankets can work independently with its own curing cycle/recipe.
The recipes are pre-installed. However, with access using a given password, it is possible to install exactly the curing cycle needed for the specific job.
If alarms occur, which may happen if a sensor is broken or if the temperature is too high or too low, or if there is a failure in a heating blanket, power loss or other related situations, a visual signal light at the top of the control system will start flashing. Alternatively, an acoustic horn will sound. With ready-selected recipes, it is easy to start a curing job. Before each start-up, the system runs a quick test to ensure that everything is correctly
connected and to find any defective components.
